Author Topic: Toyota rear bearing puller  (Read 3407 times)

Offline chicomecha

  • Dep. Web Wheeler
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 386
Toyota rear bearing puller
« on: March 17, 2008, 08:57:50 AM »
If you need to pull/replace the wheel bearings on a rear Toyota axle, you will need a special puller.  I made one out of a spare axle housing from the junkyard (I am not the first).  Anyone around the Chico area that needs it may borrow it.  You'll also need a press.  If you are a FOTHL member, I'll help you do it if you don't have the press.

Just PM me.
"If you're lucky enough to be in the mountains, you're lucky enough."